PRODUCTS

WATER SEPARATORS


High quality compressed air is essential to pneumatic and automation systems.

Correct air preparation is imperative in order to minimise component failure, increase the operating life of equipment and reduce energy consumption.

Water vapour occurs naturally in air and is present in the hot air discharged from air compressors. This hot air will then release condensate as it meets the colder surfaces of down stream equipment. Although the condensate can be removed via drains, liquid will remain in the air stream. This liquid condensate will break down lubricating oils increasing friction between moving surfaces and corrode exposed metal components.

For compressed air installations where bulk water contamination is a real problem, the Walker Filtration range of water separators offer excellent water removal effiencies even at low velocities. Typically, water separators are installed downstream of after coolers and air receivers, refrigerant dryers and at strategic points in pipe work installations. Specially designed, Walker Filtration's water separators utilise a custom engineered centrifugal module which removes large quantities of liquid by centrifugal action.

Walker Filtration water separators are tested in accordance with ISO 12500-4.

 For further product information please click here to see the product data sheet.
 

Technical Specification
Model Pipe Size Flow
Nm³/hr SCFM
A028 WS 1/4" 42 25
A038 WS 3/8" 59 35
A058 WS 1/2" 85 50
A059 CWS 1/2" 119 70
A059 WS 1/2" 119 70
A078 WS 3/4" 212 125
A108 WS 1" 297 175
A128 CWS 1 1/4" 476 280
A128 WS 1 1/4" 476 280
A158 CWS 1 1/2" 545 320
A158 WS 1 1/2" 545 320
A159 WS 1 1/2" 680 400
A208 WS 2" 1189 700
A254 WS

2 1/2"

1445 850
A340 WS 3" 2549 1500
A391 WS DN80 2160 1270
A400 WS  DN100  3100  1824
A600 WS  DN150  6500  3824
A800 WS  DN200  11000  6470
A1000 WS  DN250  17000  10000
A1200 WS  DN300  25500  15000

 

Gallery